Electric Radiator Cooling Fan Assembly For 2010-12 Chevrolet Equinox Driver Side

Description

Compatibility Vehicle:
2010-2012 Chevrolet Equinox LS Sport Utility 4 doors 2.4 L 2010-2012 Chevrolet Equinox LT Sport Utility 4 doors 2.4 L 2010-2012 Chevrolet Equinox LTZ Sport Utility 4 doors 2.4 L 2010-2012 GMC Terrain SLE Sport Utility 4 doors 2.4 L 2010-2012 GMC Terrain SLT Sport Utility 4 doors 2.4 L
About Cooling Fan:
-OE design to ensure exact fit, form and function for an easy drop-in installation;
-ISO 9001 certified manufacturing plants;
-ABS Plastic with Metal Motor;
-Built to strict quality control standards;
How to Replace the Cooling Fan?
Electric Radiator Cooling Fan Assembly For 2010-12 Chevrolet Equinox Driver Side
Compatibility Vehicle:
2010-2012 Chevrolet Equinox LS Sport Utility 4 doors 2.4 L
2010-2012 Chevrolet Equinox LT Sport Utility 4 doors 2.4 L
2010-2012 Chevrolet Equinox LTZ Sport Utility 4 doors 2.4 L
2010-2012 GMC Terrain SLE Sport Utility 4 doors 2.4 L
2010-2012 GMC Terrain SLT Sport Utility 4 doors 2.4 L
About Cooling Fan:
-OE design to ensure exact fit, form and function for an easy drop-in installation;
-ISO 9001 certified manufacturing plants;
-ABS Plastic with Metal Motor;
-Built to strict quality control standards;
How to Replace the Cooling Fan?
Step 1 - Locate and disconnect the electrical connector for the cooling fan.
Step 2 - Remove the lower mounting bolts that attach the fan to the radiator. (Note: Some vehicles have alignment dowels which need not be removed.)
Step 3 - Remove any weather stripping that will help access the cooling fan. (Note: This is not needed on most vehicles.)
Step 4 - Loosen mounting bolts or clips to remove any plastic shielding that will inhibit the replacement of the cooling fan.
Step 5 - Once all mounting bolts have been removed, lift the plastic covering from the vehicle.
Step 6 - After the plastic covers have been removed, loosen and remove the core support mounting bolts. (Note: This is not needed in some vehicles.)
Step 7 - Next, lift the core support from the vehicle. (Note: A hood cable release could be mounted to this support.)
Step 8 - Then, loosen the upper radiator hose clamp using a hose clamp tool or channel locks.
Step 9 - Once the clamp has been loosened, grasp the hose and twist using a hose pick or screwdriver to assist. Have a fluid catch basin ready as coolant will leak out. (Note: Depressurize or drain the radiator if needed. Radiator replacement.)
Step 10 - After the upper radiator hose has been removed, undo the mounting clips or bolts that hold the air intake in position. (Note: This step needed only if the air intake is blocking the removal of the cooling fan.)
Step 11 - Next, loosen and remove the upper mounting bolts from the cooling fan radiator mount.
Step 12 - Once all mounting bolts and clips have been removed, gently lift the cooling fan from the engine bay. Use caution when performing this action as to not damage the radiator cooling fins.
Step 13 - After the failed cooling fan has been removed, compare the old fan to the replacement cooling fan. Inspect mounting tabs and electrical connector to ensure proper installation. (Note: Some cooling fan designs feature the replacement motor separate.)
Step 14 - Gently lower the new cooling fan down into the engine bay and onto the radiator. Again, use caution when performing this as not to damage the radiator cooling fins.) Reassembly all mounting bolts etc., refill cooling system and check the coolant reservoir, add fluid as needed.
Tools and Supplies Needed:
1.Socket set
2.Wrench set
3.Replacement cooling fan
4.Fluid catch basin
5.Protective eyewear and gloves
6.Hose clamp tool or channel locks
FAQ Anwser
1.About shipping: We have two warehouses in US, one is located in
CA
, and other one is located in
GA
. We will dispatch packages from the nearest in stock warehouse by recipient's address accordingly. Up to 99% Orders could be shipped
within 24 hours
after payment completed.
2.About incompatibility parts received: Please provide us with detailed vehicle information including Year/ Made/Model/Trim and Engine, or VIN#. With these information, we could try to help to find out a correct OE# part or exchange a right one for you if we have it in stock.
3.About damaged package: Please take some photos of the damage part and send to us, we will inspect it carefully and confirm with engineer if the damage will cause functional or installation issues or not. For serious damage radiator, we could do resend a new one or issue refund as compensation.
4.About shipping method: UPS, FedEx, USPS are available here and we will choose one of them according to the part you order, for generally speaking, the delivery time is about 3 to 8 working days.
5.Why choose us: Professional auto parts seller, Premium Quality Products, Excellent service, Satisfactory shopping experience.
6.Other questions: Please message us before order.
Item Specifics
Brand
Autocoolinghome
Manufacturer Part Number
621-456 Cooling Fan
UPC
Does not apply
Condition
New
Warranty
1 Year
Interchange Part Number
car engine electric radiator fan,20815894,GM3115239,25952785
Other Part Number
radiator engine cooling fan for car,2010-2012 GMC Terrain
Superseded Part Number
electric radiator fan replacement,622720,20815894,25952785
Custom Bundle
No
Fitment Type
Direct Replacement
Material
ABS Plastic or Metal
Placement on Vehicle
Front
Applicable Regions
US
Type
Radiator Cooling Fan
Plug Pin Number
2
Voltage
12
RPM
1900
Amp Draw
15
DESCRIPTION
PAYMENT
SHIPPING
RETURN POLICY
CONTACT US
Shop Category
Store Home
Radiator
Condenser
Blower Motor
Motor Resistor
Cooling Fan & Kits
Fan Clutch
Evaporator Core
Heater Core
Electric Radiator Cooling Fan Assembly For 2010-12 Chevrolet Equinox Driver Side
Compatibility Vehicle:
2010-2012 Chevrolet Equinox LS Sport Utility 4 doors 2.4 L
2010-2012 Chevrolet Equinox LT Sport Utility 4 doors 2.4 L
2010-2012 Chevrolet Equinox LTZ Sport Utility 4 doors 2.4 L
2010-2012 GMC Terrain SLE Sport Utility 4 doors 2.4 L
2010-2012 GMC Terrain SLT Sport Utility 4 doors 2.4 L
About Cooling Fan:
-OE design to ensure exact fit, form and function for an easy drop-in installation;
-ISO 9001 certified manufacturing plants;
-ABS Plastic with Metal Motor;
-Built to strict quality control standards;
How to Replace the Cooling Fan?
Step 1 - Locate and disconnect the electrical connector for the cooling fan.
Step 2 - Remove the lower mounting bolts that attach the fan to the radiator. (Note: Some vehicles have alignment dowels which need not be removed.)
Step 3 - Remove any weather stripping that will help access the cooling fan. (Note: This is not needed on most vehicles.)
Step 4 - Loosen mounting bolts or clips to remove any plastic shielding that will inhibit the replacement of the cooling fan.
Step 5 - Once all mounting bolts have been removed, lift the plastic covering from the vehicle.
Step 6 - After the plastic covers have been removed, loosen and remove the core support mounting bolts. (Note: This is not needed in some vehicles.)
Step 7 - Next, lift the core support from the vehicle. (Note: A hood cable release could be mounted to this support.)
Step 8 - Then, loosen the upper radiator hose clamp using a hose clamp tool or channel locks.
Step 9 - Once the clamp has been loosened, grasp the hose and twist using a hose pick or screwdriver to assist. Have a fluid catch basin ready as coolant will leak out. (Note: Depressurize or drain the radiator if needed. Radiator replacement.)
Step 10 - After the upper radiator hose has been removed, undo the mounting clips or bolts that hold the air intake in position. (Note: This step needed only if the air intake is blocking the removal of the cooling fan.)
Step 11 - Next, loosen and remove the upper mounting bolts from the cooling fan radiator mount.
Step 12 - Once all mounting bolts and clips have been removed, gently lift the cooling fan from the engine bay. Use caution when performing this action as to not damage the radiator cooling fins.
Step 13 - After the failed cooling fan has been removed, compare the old fan to the replacement cooling fan. Inspect mounting tabs and electrical connector to ensure proper installation. (Note: Some cooling fan designs feature the replacement motor separate.)
Step 14 - Gently lower the new cooling fan down into the engine bay and onto the radiator. Again, use caution when performing this as not to damage the radiator cooling fins.) Reassembly all mounting bolts etc., refill cooling system and check the coolant reservoir, add fluid as needed.
Tools and Supplies Needed:
1.Socket set
2.Wrench set
3.Replacement cooling fan
4.Fluid catch basin
5.Protective eyewear and gloves
6.Hose clamp tool or channel locks
FAQ Anwser
1.About shipping: We have two warehouses in US, one is located in
CA
, and other one is located in
GA
. We will dispatch packages from the nearest in stock warehouse by recipient's address accordingly. Up to 99% Orders could be shipped
within 24 hours
after payment completed.
2.About incompatibility parts received: Please provide us with detailed vehicle information including Year/ Made/Model/Trim and Engine, or VIN#. With these information, we could try to help to find out a correct OE# part or exchange a right one for you if we have it in stock.
3.About damaged package: Please take some photos of the damage part and send to us, we will inspect it carefully and confirm with engineer if the damage will cause functional or installation issues or not. For serious damage radiator, we could do resend a new one or issue refund as compensation.
4.About shipping method: UPS, FedEx, USPS are available here and we will choose one of them according to the part you order, for generally speaking, the delivery time is about 3 to 8 working days.
5.Why choose us: Professional auto parts seller, Premium Quality Products, Excellent service, Satisfactory shopping experience.
6.Other questions: Please message us before order.
PAYMENT
SHIPPING
WARRANTY
RETURN
ABOUT US
All rights reserved.