-40%
2 Pack Adjustable Countertop Tite Joint Fasteners 4 inch Long Steel for wood use
2 Pack Adjustable Countertop Tite Joint Fasteners 4 inch Long Steel for wood use

2 Pack Adjustable Countertop Tite Joint Fasteners 4 inch Long Steel for wood use

$ 5.8

Availability: 76 in stock
  • Brand: KV Hardware
  • Style: Traditional
  • Features: Adjustable and dismountable if necessary, 500 pounds of force
  • MPN: KVBP5162GZS
  • Item Height: 4 inch
  • Type: Adjustale Countertop Fastener
  • Custom Bundle: No
  • Condition: New
  • Country/Region of Manufacture: United States
  • Material: Zinc, made of Steel, Center to Center: 2"-3 1/2" (50.8 mm to 88.9 mm), Center to Center: 2 in to 3 1/2 in, Designed for 3/4" thick wood, Steel
  • 500 pounds of force: Yes
  • Color: Zinc
  • Fixings Supplied: Yes
  • Manufacturer Warranty: 5 Years
  • Item Depth: 2 in
  • Number in Pack: 2
  • Suitable For: Adjustale Countertop Fastener, Drilling Diameter: 1/4 in (6.35 mm), Center to Center: 2 in to 3 1/2 in
  • Item Width: 2.4 inch
  • Finish: Nickel-plated

    Description

    2 Pack Adjustable Countertop Tite Joint Fasteners 4 inch Long Steel
    Zinc, Made of Steel
    Applies even, controlled pressure between joint members, eliminating twisting and buckling
    Adjustable and dismountable if necessary
    Designed for 3/4" thick wood
    Length: 4 in (102 mm) | Center to Center: 2 in to 3 1/2 in (50.8 mm to 88.9 mm) | Drilling Diameter: 1/4 in (6.35 mm)
    Finish: Zinc, made of Steel | Pack of 2
    Product description
    Ideal to join countertop pieces together, renovation is definitely no longer an issue with this tool. Installation: 1. Drill 7/8'' holes from back side in each piece to accommodate tightening nut and locking sleeve. Drill 7/16'' holes in edges of both pieces for draw bolt. 2. Insert tightening nut in 7/8'' hole facing threaded end towards the joint. Insert draw bolt and thread into nut. 3. Join both wood members. Insert locking sleeves in the remaining 7/8'' hole so that the slotted sleeve engages the rounded portion on bolt. 4. Tighten nut with tightening tool or nail set. Each pound of pressure on the tightening tool exerts 500 pounds of force on the joint.
    Installation
    1. Drill 7/8'' holes from back side in each piece to accommodate tightening nut and locking sleeve. Drill 7/16'' holes in edges of both pieces for draw bolt
    2. Insert tightening nut in 7/8'' hole facing threaded end towards the joint. Insert draw bolt and thread into nut
    3. Join both wood members. Insert locking sleeves in the remaining 7/8'' hole so that the slotted sleeve engages the rounded portion on bolt
    4. Tighten nut with tightening tool or nail set. Each pound of pressure on the tightening tool exerts 500 pounds of force on the joint